Speed up Your Data Transfer between PC Storage and External Drive

Transferring data between a PC’s internal storage and an external drive is one of the most common tasks a user performs. One can be able to transfer Photos, videos, music, etc., either from the PC to an external drive or to a PC from the external drive. To speed up your data transfer comes in different ways which have been prepared for you in this site.

To speed up your data transfer is one major important task that needs consideration on your PC. That is because waiting for the system to transfer files for a long while is something that can be worrisome. So you need to follow the steps to enable you to speed up your data transfer.

Methods to Speed up Your Data Transfer

About four methods have been outlined and explained for you below on how you can be able to Speed up your data transfer:

 Set up a Backup to your USB/SD card

This is the first major step one has to take in order to avoid loss of data. Ensuring a Backup helps you to save your USB/SD external drive to a safe place. This can be done through copy and paste files to a target storage device.

Although, if you can’t be able to follow the procedure that has been explained above, you’ll then have to use an active backup software to help and guide you.

Convert SD/USB Drive from FAT32 to NTFS

It is recommendable for you to convert SD/USB from FAT32 to NTFS on your Windows PC.As this will equally serve as help for your transfer boost.

This can be done through the use of software by name “EaseUS Partition Master Free. This software enables you to follow up the conversion process directly without making use of the formatting process.

But should there be any case whereby you wish to use the formatting procedure, here are the steps below:

  1. First is to connect the SD/USB drive to your computer PC.
  2. Then enter the Windows Explorer, locate and right-click on your USB or SD card, and select “Format.”
  3. After that, reset the file system to NTFS and clickStart to confirm, and then click “OK.
    Finally, just wait for the process to complete.

Optimize USB/SD for better performance

In order to change the settings to increase transfer speed, just follow the steps below to optimize USB/SD performance:

  1. Firstly, Right-click on SD or USB Drive and select “Properties.”
  2. Move your cursor to the Hardware tab and select your SD or USB drive, then equally click on “Properties.”
  3. Next is to click on “Change settings” which is located on the Generic-Multi-Card USB Device Properties.
  4. Then go toPoliciestab on the settings interface and select “Better Performance” 
  5. Finally, click “OK” for the changes to take effect.

 Note: Having followed this step and it worked out successfully, you’ll then have to restart your computer in order for the changes to finally take full effect.

Also Read: How to Recover Deleted Files from SD Card

The Quick Removal Method for better performance

Caches is another thing that slows down speed transfer, that is why this Quick Removal method is important in the sense that it helps to disable write caching. Follow the steps below and access this method:

  1. The first step is to search for on the start button Device Manager and click “Open.”
  2. Secondly, expand and locate the drive you want to improve.
  3. Double-click the drive’s icon and locate “policies” tab in the Windows.
  4. Next is to click on the “Better Performance” radio button.
  5. Then check the “Enable Write Caching” on the device check box.
  6. After that, then click “OK”

Note: If you are to enable this feature, you will have to remove the device from within Windows before unplugging it. Failure to do so can result in data loss.

For easy access, right-click on your desktop and create a new shortcut. This new shortcut takes you directly to the “Safely Remove Hardware” menu.

Read More: How to Fix Your Computer When it Fails to Boot

 

Was this helpful? Let’s have your take on this one by dropping a comment below.